This has been a productive week. I am coming along nicely with MY NEXT LIFETIME QUILT, aka Old Italian Blocks. It's been less than a year since I started this so that is good progress. The 3"blocks were made as Leader/Enders, using reproduction fabrics from my deep stash.
There is a very organized color plan although it may be hard to see here. First, I sorted all the blocks into basic color groups: dark blue, light blue, dark green, light green, black/brown, yellow/rust/orange, red/pink, purple, gray, lights. I was striving for NO repeats, but, alas, there may be a couple.
Once I cleared the design wall and placed all 289 blocks exactly where I wanted them, I knew I had to sew the complete top as quickly as possible to use the design wall again. Here is the layout:
After careful pressing, the sewn row goes back on the design wall and I make the next row. After making 4 rows, I join them in pairs, then into fours, then they go back on the wall. Once I get the first half done, I will switch to the other side to complete the other half. That way, the entire quilt is only under the needle for the final seam joining the two halves.
This is a replica of an antique top I bought in 2014--read about it HERE--same link as above.
I am eager to get this top complete. At this point I expect there is a solid week of piecing to get it done. Then I can move on to other things and the design wall will be usable again.
For those interested, my DESIGN WALL is two sheets of 4' x 8' foam board, covered in Warm and White cotton batt, mounted to the wall. Blocks stick to the batting easily without pins. Only long rows once joined into larger sections need a few pins due to their weight. I've had this wall for 25 years. It is covered with strings--they are hard to remove because my husband used a squirt bottle of Elmer's White School Glue to adhere the batting. In hindsight, mixing a thinner solution of that glue/water might have allowed it to be painted on, keeping the batting more firmly in place. I still love my wall and use it every day.
If you want more information on how to make these fun blocks, in 3 different sizes, see my SUMMER SEW ALONG 2025
Let's quilt.
Barbara
Use a vacuum cleaner or lint roller to de-string your design wall. Mine is three doors hinged together (remove hinge pins to move) with flannel stapled over all. It took three strips of flannel to cover the three doors. I used to use it as a room divider on one side and my flannel wall on the other.
ReplyDeleteWhere I have it now, it leans against the wall at the top with just enough room at the bottom for the cats to chase each other. Otherwise (when used as a room divider), it bends so that it will stand upright.
I absolutely love this Lifetime quilt, Barbara! The mini quilt I made from that 3" block is one of my favorites. Your quilt makes me want to tackle it in a larger size quilt, but it will have to wait on the list for a long time. I have way too many UFOs that are my current focus.
ReplyDeleteI use a similar method to transfer things from the design wall to the machine--but I finally made a larger design board so it handles. long rows much easier than my smaller ones did.
My design wall is made the very same way--except for the glue. I used T-pins to secure the batting along the outer edges. I can remove pins and pull it taut anytime I want. And I don't worry much about all the strings on it. Every now and then I will clean it up a bit, but not often.
I've only had my design wall for 15 years, and I don't know how I functioned without it!